Second, can we see VOR on the screen
If so, it means we have open the voice activated recording function, during this setting, it will only
records when high enough decibels sound detected, we could go to record setting, find AVR
sensitivity, and adjust it. It helps
But we could turn the AVR mode, if we do not want this function
13) Press REC, it shows "OVER RECORD"
When press REC, it not records, it show "OVER RECORD", that means the voice recorder memory is
full, or we have too many "FOLDER" or "recordings" in the recorder.
Why this happened? Although we may not record too long time. Sometimes mistakenly RECORD,
and SAVE again and again, or copy or create too many "FOLDER" in the recorder disk. Maybe there is
some files that cannot be read by the recorder, so we cannot find directly from the recorder
So we need to format the voice recorder, or connect to computer and have a check, after that format
the recorder disk from computer directly
Why it is only playing 10 seconds
14)
This is because we have entered view playing playback mode, it will playback 10seconds of each file.
We could set to repeat all, and fix this issue.
15) Why it playback in random
Go to play setting, close the shuffle function
16) How to use the A-B repeat function
During playback, press down M, we will see A on the screen, and B is blink, it selected the start point
Press down M again, select point B
Now it will playback between Point A to B
17) The recording is noise
Don't recording near computer, electric fans, air conditioner, sound bar that will easily cause noise,
the recorder will pickup this statics noise
14