Voice Activated Recording - Evistr L157 Manual

EVISTR VOICE RECORDER
http://blog.evistr.com support-us@evistr.com
At subsection recording, it could select Half hour, One half, Two hour, CLOSE
What is subsection recording?
Recorder will automatically save the recording file at a selected time length and start a new
recording.
Half Hour: record each file at 30minutes.
One Hour: record each file at 1 hour.
Two Hour: record each file at 2 hour.
CLOSE: turn off subsection record function.
e.g. When select Half hour, each time, recording time length reached 30minutes, it will
automatically save the recording, and then start a new recording.
If want to close this function, select CLOSE, and press M(menu) to confirm & save settings.

1.4 Voice Activated Recording

What is Voice Activated Recording?
When AVR mode is ON. Press REC, screen will display VOX information, it means the device
successfully enter voice activated recording mode.
Voice Activated Mode (AVR)
When AVR is on, device will record any voice. If no voice is detected, it will not record to reduce
blank time and save storage space.
At AVR mode, we still need to press STOP to save recordings when we complete a recording
task.
AVR Mode
ON: turn on voice activated record function.
OFF: turn off voice activated record function.
Voice Activated Sensitive Level
From Level 1 to Level 5: Level 1 only picks up voice or sound above 70db, a very loud sound.
Level 5 is very sensitive, so any quiet sound will be recorded. (i.e. normal environmental noise
will activate recording).
Note: do not turn on this function for important lectures or meetings. It may skip or lose some
very important sentences at low decibels. Use regular on/record/stop for meetings.
It could select from level one to level five
Level one, is the mostly dumb level, it means the mic will be less sensitive, need louder voice to
Page - 16 - of -25 -