Table of Contents
Advertisement
Available languages
Available languages
lAMP oPerAtion
Ancillary Assembly
The assembly and changing of the ancillary equipment is to be carried out from a stable
position.
Assembly of the lamp cl8X8 and erecting the frame
Any standard 8x8 frame can be used for mounting. Use the 16 eylets and the supplied
bungee cords for mounting the textile lamp inside the frame.
Take safety precautions of the lamps contact surface in regard of wind!
Packing the textile lamp
Fold the lamp as follows: place both cabel-sides on top of each other, with the light
emitting side facing inwards. Then the lamp can be quatered or directly rolled up and
stowed in the provided bag.
21
Advertisement
Table of Contents
