Operation Of The Control Unit - CARPETLIGHT CL8X8 Instruction Manual

oPerAtion of tHe control unit

Power Switch Display Button
CL 8x8 CONTROLLER
STANDBY
MENU
DC IN LAMP
Brightness Color Temperature 4 pole Lamp-Socket
DC IN
Control Control
Speakon
The CL8X8 lamp takes two identical control units that can be operated individually.
The control unit must be connected to the lamp body using the supplied 4 pole control
cable. Do not twist or turn the connectors! The plugs and sockets for the 4 pole
STANDBY
control cable are push /pull types with a circular locking ring. Align plugs and sockets
MENU
according to their mechanical coding and srew the locking rings clockwise to lock and
counterclockwise to unlock the connectors.
The speakon-DC connector is a lockable slewing mechanism. Plug the connector into
the socket by finding the correct slot and then with a little pressure turn to the right.
To disconnect, retract the silver slider, then slightly rotate left, then you can unplug the
cable.
there are different types of power supply
Mains supply 90-240 Volt
Connect the speakon DC plug of the power supply to the speakon socket (DC IN) by
inserting and twisting right. (To unplug pull the top lever back and twist left).
After that, connect the power supply to the mains outlet with the supplied AC cable.
V-Mount operation
Connect the Speakon DC plug of the supplied V-mount adapter to the speakon socket
(DC IN) by inserting and twisting right. (To unplug pull the top lever back and twist left.)
After that insert two batteries (with a minimal discharge current of 9 Amps/each) to the
V-mount adapter.
An alternative DC power supply can be used after approval by cArPetligHt GmbH.
Do not connect or disconnect the connectors of the power and control cable while
voltage or current are present.
We decline any liability for damages caused as a result of non observance.
22