Table of Contents
Advertisement
Quick Links
SCxxxN_ES_EN_FR_IT_PT_ver1
USER'S AND INSTALLATION MANUAL
Dear buyer, we thank you for purchase of our product.
Prior to installation and first use of the electric water heater, please carefully read these
instructions.
This water heater has been manufactured in compliance with the relevant standards and tested
by the relevant authorities as indicated by the Safety Certificate and the Electromagnetic Compatibility
Certificate. The technical characteristics of the product are listed on the label affixed between the inlet
and outlet pipes. The installation must be carried out by qualified staff. All repairs and maintenance
work within the water heater, e.g. lime removal or inspection/replacement of the protective anticorrosion
anode, must be carried out by the authorised maintenance service provider.
Technical Information:
MODEL
CAPACITY
ELECTRICAL CHARACTERISTICS:
VOLTAGE (V)
FREQUENCY (Hz)
POWER (W)
CLASS
PROTECTION
DEGREE
REGULATION
THERMOSTAT
TEMPERATURE
KIND OF
REGULATION
THERMOSTAT
KIND OF SAFETY
THERMOSTAT
EXTERNAL
TEMPERATURE
REGULATION
KIND OF
HEATING
ELEMENT
KIND OF
HEATING
ELEMENT
HYDRAULIC CHARACTERISTICS:
ENAMELLED TANK
MAGNESIUM
ANODE
NOMINAL
PRESSURE
SAFETY VALVE
PRESSURE
APARICI – SCxxxN
INSTALLATION MANUAL
SC030N
30
230
50/60
2000 W
(800W + 1200W)
I
IPX4
75
(ºC)
PTC SENSOR
BULB
YES
YES -
ELECTRONIC
IN DIRECT
CONTACT
WITH WATER
YES
YES
7.5 bar
8.5 bar
SC050N
SC080N
50
230
50/60
2000
(800W + 1200W)
(800W + 1200W)
I
IPX4
75
PTC SENSOR
PTC SENSOR
BULB
YES
YES -
ELECTRONIC
ELECTRONIC
IN DIRECT
IN DIRECT
CONTACT WITH
CONTACT
WATER
WITH WATER
YES
YES
7.5 bar
8.5 bar
9
SC100N
80
100
230
230
50/60
50/60
2000
2000
(800W + 1200W)
I
I
IPX4
IPX4
75
75
PTC SENSOR
BULB
BULB
YES
YES
YES -
YES -
ELECTRONIC
IN DIRECT
CONTACT
WITH WATER
YES
YES
YES
YES
7.5 bar
7.5 bar
8.5 bar
8.5 bar
Advertisement
Table of Contents
Related Manuals for Aparici SC N Series
Summary of Contents for Aparici SC N Series
- Page 1 SCxxxN_ES_EN_FR_IT_PT_ver1 USER'S AND INSTALLATION MANUAL APARICI – SCxxxN Dear buyer, we thank you for purchase of our product. Prior to installation and first use of the electric water heater, please carefully read these instructions. This water heater has been manufactured in compliance with the relevant standards and tested by the relevant authorities as indicated by the Safety Certificate and the Electromagnetic Compatibility Certificate.
- Page 2 218.5 218.5 218.5 fig.-1 – Model APARICI SCxxxN 1.- BUILDING-IN. The water heater shall be built-in as close as possible to the outlets in order to reduce the heat loses. The building place must be chosen considering the maximum reductions of 90º elbows in water connections and, at the same time, make easy the substitution of the heating element.
- Page 3 SCxxxN_ES_EN_FR_IT_PT_ver1 Fig. 2 Model APARICI SCxxxN In every case the distance between water heater maintenance cover and the closer wall must be minimum 60 It has to be fitted to the wall using appropriate rag bolts with minimum diameter of 8 mm. The wall with feeble charging ability must be on the spot where the water heater shall be hanged suitably reinforced.
- Page 4 According to this the sole necessary operation from electrical point of view is to plug the water heater to a socked. If the flexible cord is damaged, it must be substituted by an especial plug cord APARICI reference 91027.
- Page 5 Fig. – 5 6.- INSTALLATION RECOMMENDATIONS In order to have a correct operation of the APARICI electric water heater, please take into account the below considerations: 1. Water pressure at electric water heater inlet must be between 1.5 and 5 bar. Also all considerations explained at point 3) of this manual must be taken into account.
- Page 6 SCxxxN_ES_EN_FR_IT_PT_ver1 Fig. – 6 1) Plug in the electric water heater to electrical network using the plug cord assembled to the appliance. At first time the power is connected, the screen lights, and shows ”CL”, after 1s the screen lights off and water heater remains into stand by state.
- Page 7 SCxxxN_ES_EN_FR_IT_PT_ver1 again makes that the fault code will be eliminated. The fault code meaning is the below one: FAULT ERROR CAUSE ACTION Dry burning protection. The water Disconnect the appliance power, fill the water heater operates without water at tank heater tank and, then, plug it again.
Need help?
Do you have a question about the SC N Series and is the answer not in the manual?
Questions and answers