Zooming knob
Focusing knob
8.
For a motorized zoom lens camera, power on the device and
directly commission images.
The preceding installation process is concealed
installation, during which holes are drilled in the ceiling
and the tail cable is led out from the top of the device.
Cables are connected and frapped at the ceiling side to
prevent messy cables from affecting device mounting. If
open installation is adopted, the tail cable is led out
from one side of the device and can be routed from one
side where a piece of plastic skin is broken off.
After mounting the dome housing, check that the three
socket fillister‐head screws along the edge of the dome
housing are tightened up. For details, see
the Micro SD Card (Optional)" to ensure that the device
is properly sealed.
14
"Mounting