Table of Contents
Advertisement
the maximum charging current of motorized zoom lens
devices is 0.47 A.
Verify that the power cable between the power adapter and
the device is equal to or shorter than 1.5 m. If the power
cable is longer than 1.5 m, the voltage of the device is
lowered, causing the device to work improperly. If it is
required to lengthen the power cable, lengthen the cable
between the power adapter and the mains (220 V).
Be sure to disconnect the power before moving the device,
and excise caution to avoid electric shock when moving it.
Once the cable is connected to the mains, the device will be
powered.
When moving the device, do not hold the tail cable by hand
for weight bearing. Otherwise, the cable connector of the
device could be loosened.
Do not cut off the tail cable for connection purposes. A bare
tail cable may easily cause a short circuit, resulting in
abnormality of or damage to the device.
6
Advertisement
Table of Contents
