Out-Of-Range Detection - Verizon One User Manual

15. Using Intercom and Call Transfer Functions

15.5 Out-of-Range Detection

If the Handset detects an out-of-range
condition, it will start searching for the
Base and display the following screen:
© 2006 Verizon
Verizon One
After the Handset finds the Base, the
Handset will display the Standby screen.
If the Handset cannot find the Base, the
Handset will emit an error tone and display
an "Out of range" message. The user
should then move closer to the Base until
the Handset is within range again:
User Guide
61