Verizon One User Manual page 29

10. Verizon One Handset Controls
10.1 Handset Control Buttons (cont'd)
Button Function
Hold When pressed once, this button will place the call on Hold. Press <Hold> again to release the call from hold status.
Intercom When <Intercom> is pressed on the Handset, it becomes a paging device to locate the Base Unit and/or to
establish an intercom call between the Handset and Base Unit. When <Intercom> is pressed, the Base Unit
will receive the signal from the Handset, and will ring until the Base Unit is set to an Off-Hook status or until
<Intercom> is pressed on the Handset again, thus turning the intercom function off.
Redial Redial enables you to select one of the last 5 phone numbers entered in the phone. (Note: It will not redial numbers
such as passcodes or account numbers that may have been entered after the outgoing call was established.)
12-key Keypad The Keypad enables you to enter the desired numbers and characters.
(0-9, *, #)
Check icons Pressing this button will allow you to:
-Select a menu option from the Main Menu screen
-Edit/Erase/Save the option setting
© 2006 Verizon
Verizon One User Guide
29