Led Indicators - Verizon One User Manual

20. Home Networking

20.3.2 LED Indicators

The LEDs located on the front of Verizon One are used to verify the unit's operation and status. Refer to the following chart for
details on the LEDs:
LED
POWER
DSL/RDY
ETHERNET
(E1, E2, E3, E4)
© 2006 Verizon
LED States and Descriptions
State Description
Solid Green Verizon One
OFF Verizon One
Solid Red CS POST (Power On Self Test), Failure (not bootable) or Device Malfunction.
Note: The Power LED should be red no longer than two seconds after the power
on self test passes.
Solid Green Good DSL sync.
Flashing Green DSL attempting to sync
OFF Verizon One power is OFF.
Solid Green Powered device is connected to one or more of the Ethernet ports (includes devices
with wake-on LAN capability where slight voltage is supplied to an Ethernet connection)
Note: When using the WAN/E1 port, Ethernet LAN connection is limited to E2, E3,
and E4.
OFF Communication Subsystem power is OFF, no cable or no powered device is connected to
the Ethernet ports.
Verizon One User Guide
power is ON
power is OFF
114