Installing Your Verizon One Home Network - Verizon One User Manual

20. Home Networking
20.2 Important Information About Your
Verizon One Home Network
(cont'd)
Note: Verizon One
Hereafter, the
Communications Subsystem will be
referred to as "Verizon
"Gateway," or "Modem."
Your Verizon One Wireless Home
Network was shipped to you disabled
(turned OFF). Enable (turn ON) your
Wireless Network by:
1. Selecting Menu on the
touch-screen display
2. Select Settings
3. Select Wireless
© 2006 Verizon
The Wireless Network screen on the
Verizon One
allow you to create your Wireless Network
Name (called a Service Set ID
or SSID). The default SSID for
One is: Verizon One followed by the
last 4-digits of the unit's serial number
One,"
(located below the bar code on the bottom
of the unit). For example: VerizonOne1234.
Verizon One
Verizon One User Guide
touch-screen display will also
Verizon
20.3 Installing Your Verizon One
Home Network
This section explains how to install your
Verizon One Home Network:
• Home Networking System
Requirements – See Section 20.3.1
• Verizon One LED Indicators – See
Section 20.3.2
Verizon One
• Interface Descriptions
– See Section 20.3.3
• Installing a Wired Network – See
Section 20.3.4
• Installing a Wireless Network – See
Section 20.3.5
• Installing both a Wired and a Wireless
network simultaneously – See Section
20.3.6
112