Operation; Power Switch - Craftsman CMXEVBE172500 Instruction Manual

2.5 gallon (9.5 liter) wet/dry vac
Table of Contents

Advertisement

Available languages

Available languages

OPERATION

WARNING:
!
To reduce the risk of fire, explosion, or
damage to Vac:
• Do not leave Vac running while unattended - you
may fail to notice important signs indicating
abnormal operation such as loss of suction,
debris/liquid exiting the exhaust, or abnormal
motor noises. Immediately stop using Vac if you
notice these signs.
• Do not leave Vac plugged in when not in use.
• Do not continue running when float has cut off
suction.
• Sparks inside the motor can ignite airborne
flammables. Do not operate Vac near
flammable liquids or in areas with flam-
mable
gases,
airborne
dust.
gases, and vapors include: lighter fluid,
solvent-type
gasoline, alcohol, and aerosol sprays. Explosive
dusts include: coal, magnesium, aluminum,
grain, and gun powder.
• Do not vacuum up explosive dusts, flammable
liquids, or hot ashes.
• Do not leave sawdust or rags with stain or
polyurethane residue inside Vac. Empty drum
after picking up these potentially self-heating
materials.
WARNING:
!
To reduce the risk of electric shock or injury:
• Do not expose to rain or allow liquid to enter
motor compartment. Store indoors.
• Do not handle plug, switch, or Vac with wet
hands.
• Unplug Vac before servicing. If your Vac is not
working as it should, has missing parts, has
been dropped, damaged, left outdoors, or
dropped into water, call customer service at
1-888-331-4569.
• When using an extension cord, use only
outdoor-rated cords that are in good condition.
Do not allow the connection to come into contact
with liquid.
CAUTION:
!
To reduce the risk of hearing damage, wear ear
protectors when using the Vac/Blower for extended
time or in a noisy area.
SP7097-1 CMXEVBE172500.indb 9
vapors,
or
explosive/
Flammable
liquids,
cleaners,
oil-based
paints,
Power Switch (Fig. L)
After you Plug the Power Cord into the Outlet, turn the Unit
on by pushing the Switch from position "O" to position "l".
The symbols used on the Switch Actuator are International
"On & Off" Symbols:
= OFF
Fig. L
= ON
I = "On"
O = "Off"
9
6/25/19 9:03 AM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents