I Initializing
Set the rotation speed of the Encoder.
I Actual Setting Example
1. Setting the Origin
Any mode can be used to set the origin except for the Run Mode.
Ex. Set the process value of 180° to 0°.
a. Set the mode switch to PRGM.
b. Set the programming mode switch to TCH.
Mode
PRGM
Initial Display
c. Adjust the machine (Encoder) to the position of the desired origin
(180° in the example).
FAST: 60 to 330 min
SLOW: 60 min
Programming Mode
−1
−1
max.
d. Press the ORIGIN Key.
Cam Positioner
H8PS
C-169