10. Installation
10.1 General notes
Warning
Installation must be carried out by
authorised and qualified personnel.
Observe the installation and operating
instructions for the motor used.
Protect the shaft and propeller against
shock, impact and twisting.
When introducing into the dosing tank, do
not twist the shaft or strain it with the
weight of the motor.
Caution
Shaft and propeller must not touch any
part of the dosing tank.
Do not hold or transport the electric stirrer
by the shaft or propeller.
10.3 Installation dimensions
Fig. 5
Dosing tank station, cross section and top view
10
D
T
Installation surfaces (dosing tank cover or
Note
mounting frames) must be as free from
vibrations as possible.
10.2 Preparations before installation
Do not position the electric stirrer centrally
in the dosing tank.
Caution
The propeller must not be positioned too
close to the dosing tank base.
The electric stirrer must not run dry.
See section
10.3 Installation
dimensions.