Recording Status Messages - PRESONUS StudioLive III Series Owner's Manual

8 SD Recording
8.3 Capture Screen
8.3.1

Recording Status Messages

Status:
1
2
3
4
5
6
7
1. Record Duration. Shows the total recorded length of the current Session.
2. Current Position. Shows the current position of the recording and playback.
3. Timeline. Shows the current cursor location in the timeline of the current
Session.
4. Arm All Tracks. Touching this button will arm all 34 tracks for recording. This will
record all 32 input channels and your Main mix.
5. Select Arm Tracks. Press the Select button to enable channel selection mode.
In this mode, you can press the Select buttons on each channel in the mixer to
arm specific channels for recording. When a channel is selected, its Select button
glows steadily. When a channel is not selected, the button flashes.
A note to StudioLive 64S Users: Because SD recording is limited to 34 tracks, any channel
on your StudioLive 64S can be routed to any of the 34 tracks in your Capture SD session.
Because of this, it is important to understand that the Select buttons in this mode are
arming the Track in the Capture SD session, not selecting a Channel for recording. For
more information, please review Section 12.3.5.
6. All Ch to SD Input. Touch this button to route audio from the Capture Session
to the input channels. Touch this button again to go back to the previously
established routing.
7. Recording Lock. Touch this button to enable Recording Lock mode. When this
mode is enabled, recording cannot be stopped by pressing the Stop button in
the Transport controls. To disable this mode, touch the lock button again.
8. Jog. Touch this button to use the Master Control encoder as a jog-wheel, to
move the recording/playback cursor.
9. Rec. Errors. This field indicates the number of errors and the potential for errors
to occur. See Section 8.3.1 for more information.
10. Status. Displays the current recording status. See Section 8.3.1 for details.
11. Current Timeline Position. Displays the current playback and recording
position.
12. Remaining Time. Shows the amount of time available for recording on the
connected recording medium
13. Session Name. Displays the name of the current Session.
14. Save and Close. Saves the session and returns to the Live Recording Edit screen.
The following indicators on the Capture screen will help you to keep an eye on how
well your recording session is going:
• Ready. SD Card session is loaded, is currently not busy, and is waiting for user
input.
• Recording. Audio is being recorded to any Track(s) that are currently armed for
recording.
8
StudioLive™ Series III
Owner's Manual
14
13
12
11
10
9
76