Download Print this page
Hyundai J9F18 AU000 Quick Reference Manual

Hyundai J9F18 AU000 Quick Reference Manual

Cargo blocks

Advertisement

Quick Links

Copy OEM Logo Here
Application Notes
This product is intended for use on carpeted surfaces only, view application chart on Page 3
Instructional Symbols / Definitions
Denotes warnings that may lead to serious
physical injury or vehicle damage
Denotes cautions to be taken to avoid
physical injury or electronic component
damage
Denotes cautions to be taken to avoid
vehicle and component damage
Basic Required Tools
NONE
Part Weight (Gross)
0.40
lbs
0.18
kg
Notes to the Installer:
1) Read the entire Installation Instructions prior to beginning the installation of this accessory.
2) Make sure the vehicle is completely clean and dry in the area(s) the part is to be installed.
3) Ensure the vehicle is properly protected in the area(s) that the accessory is to be installed.
4) NEVER place tools on painted surfaces, seating surfaces, dash pad, console or floor carpet/mats.
5) Always wear appropriate personal protective equipment, including gloves, safety glasses, etc, when required.
Kit Overview
No.
Qty
Description
1
4
Cargo Blocks
2
1
Quick Reference Guide*
*Please Note: Item 2 is not included in PIO kit
ISHY025
Vehicle Model:
MULTIPLE
Model Year
MULTIPLE
(→)
Part No.
J9F18 AU000 (DIO)
J9F18 AU600 (PIO)
Language English
Rev. Date
2/7/2019
N
O
T
E
FMVSS 110 Compliance Information
All dealers must determine if the Net weight they have added in the form of all options or accessories, when added to the weight of all Port/Dealer Installed
options or accessories, exceeds the lesser of 1.5% of GVWR or 100 lbs. If the additional weight does exceed the lesser of the indicated thresholds, a "Load
Carrying Capacity Reduced" label must be installed. A black, fine-point, indelible marker must be used to write by hand onto the label, the reduced carrying
capacity in kilograms or pounds, which is the total weight of all added options and accessories.
Load Label Part Number: NP070 - 09003
1
Genuine Accessories
Denotes quality processes to be checked
prior to moving to the next step
Denotes specific tools that are necessary
to complete a step
Denotes important information to be
reviewed during the step
2
Revision Date
02/07/2019
Accessory:
Cargo Blocks
Difficulty:
( A )
Note:
Difficulty stated above reflects the minimum level of
expertise required to install the accessory:
(A) Customer
(B) Dealer Technician
(C) Master Technician or Specialist
Denotes personal protective equipment (PPEs) that
may be required for a step. Examples of safety
equipment icons noted below:
Glasses
Mask
Hearing Protection
Gloves
Page 1 of 3

Advertisement

loading

Summary of Contents for Hyundai J9F18 AU000

  • Page 1 Model Year MULTIPLE Difficulty: ( A ) Copy OEM Logo Here (→) Part No. J9F18 AU000 (DIO) Note: Difficulty stated above reflects the minimum level of J9F18 AU600 (PIO) expertise required to install the accessory: Language English (A) Customer Rev. Date...
  • Page 2 Genuine Accessories NEW VEHICLE INSTALLATION, PLEASE FOLLOW STEPS BELOW A. Open the rear hatch. A. Place Cargo Blocks on the floor in the shape of a one (1) foot square, B. Remove Cargo Blocks from the packaging. with bottoms facing each other as shown. This is the recommended position for demonstrating this accessory.
  • Page 3 Genuine Accessories Visual Check Item to be Checked Result Cargo Blocks are stable and seated on the floor surrounding the item. Cargo Blocks are in place. Care & Cleaning Cleaning Instructions for: MULTIPLE Cargo Blocks The Cargo Blocks can be wiped, swept, lightly vacuumed, cleaned with water, or soap and water. Do not use petroleum-based solvents for cleaning.

This manual is also suitable for:

J9f18 au600