Tips To Perfection - Intec CA10 Instruction Manual

Ionized pool
Hide thumbs Also See for CA10:
Table of Contents

Advertisement

Intec is not recommending that you change your filter, but that you learn to work with
the one you have. If ever you have problems with your present filter, then you might consider
changing to the cartridge filter.
A. Always err on the side of under treating your pool water rather than over treating your
pool water.
B. On a new pool or one under construction, be sure to tell the pool builder not to put any
chemicals in the water. Tell him you will start taking care of it from the very beginning.
Sometimes they will put a Metal-Out product in the water. This product will take the
copper ions out of the water as fast as the electronic unit can put them in until all of the
Metal-Out is out.
C. When you are using the ionization unit, the pool pump must always be running so the
copper ions can be flushed from the electrode into the pool.
D. Test accurately and often. Make small treatments when necessary. Insufficient testing
and treatment will ultimately take more time and more money. Your water will always
be perfect with consistent testing and treatment.
E. Keep on hand all the supplies you might need for two months.
F. Operate the pump during the day which is when your water is under the most stress.
Recommended hours to run pool pump:
Daily High Temp
G. Do not use any algaecides because copper ions are the single best algaestat on planet
earth. Many algaecides are copper based. Adding algaecides will cause you to get a
high false reading on the copper test.
SECTION 7.0 TIPS TO PERFECTION
90-95
85-90
80-85
75-80
70-75
Hours
12
10
8
6
4
24

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cv50Cv60

Table of Contents