Installation & Operation; Notes On Installation; Cleaning And Maintenance - Siemens SIMATIC RTLS Operating Instructions Manual

Installation & Operation
3.1

Notes on installation

Note
Before you install the devices, read this section carefully to ensure trouble-free installation
and commissioning.
The devices can only be used in conjunction with the RTLS localization system.
An adhesive label with the serial number is attached to the transponder.
The transponder is installed in an enclosure so that it is no longer visible (e.g. electric
screwdriver). After installing the transponder, you need to attach the adhesive label with the
serial number to the enclosure in such a way that the serial number can be easily read from
the outside and the label cannot be wiped off.
The label is required to identify the device with the installed transponder in the
Locating Manager.
3.2

Cleaning and maintenance

The device may only be opened by suitably trained and qualified users. Only authorized
dealers are permitted to repair the device.
Unauthorized opening of and improper repairs to the device may cause substantial risks to
the user. As soon as the device was opened without permission, warranty and liability of the
Siemens AG are rendered null and void.
Do not clean the enclosure with abrasive, alkaline or aggressive cleaning products or aids.
SIMATIC RTLS PCB OEM AC
Operating Instructions, 03/2020, C79000-G8976-C519-03
3
13