Table of Contents
Advertisement
3.3 Oil Service
1)
Turn the ignition off.
2)
Locate the vehicle's 16-pin Data Link Connector (DLC).
3)
Plug the OBDII connector to the vehicle's DLC.
4)
Turn the ignition on. But do not start the engine.
5)
Press the
6)
UP/DOWN scroll button to select Oil Service from the menu, and
Use
press the Y button.
7)
UP/DOWN scroll button to select vehicle maker, and press Y button.
Use
8)
UP/DOWN scroll button to select a vehicle, and press Y button to
Use
confirm.
VS862 - 2 - 151107
Y button. The Main Menu will be observed on the display.
1) VW/AUDI
2) OBDII/EOBD
►3) Oil Service
4) System Setup
1) Auto Detect
2) Audi
►3) VW
4) Seat
5) Skoda
Main Menu
Oil Service
19
≤ V2.4 SOFTWARE
Advertisement
Table of Contents
