Service And Warranty; System Diagnostics; Troubleshooting - BENDIX SmarTire User Manual

Service and Warranty

S Y S T E M D I A G N O S T I C S
Error code
on display
E1
E2
E3
E4
T R O U B L E S H O O T I N G
E1 Error
This error may occur in certain vehicles where the receiver unit is powered even
when the ignition is turned off. Cases include vehicles where the cigarette lighter
outlet is powered without the vehicle running. Other possible causes may be
28 broken tire sensors or a malfunctioning Receiver unit. Mismatches in tire sensor ID
may also cause this problem.
E2 Error
This error indicates that there is a problem with the data in the Receiver and /or
Display units. Causes of this error can include :
Component Fault
failing
Sensor(s) Not transmitting
Receiver RF section
malfunction
Receiver EEPROM fault
and/or
Display
Receiver Oscillator fault
and/or
Display
Receiver Internal bus fault
and/or
Display
Action(s)
If no transmission received within
5 minutes of driving, contact dealer
Contact dealer
Contact dealer
Contact dealer