Low-Pressure Warning - BENDIX SmarTire User Manual

L O W- P R E S S U R E WA R N I N G
Factory default 18 PSI = 1.25 Bar
18 PSI = 1.25 Bar
14
This function changes the low-pressure warning
threshold for each axle.
Programming Steps
Enter Level 1 Programming Mode
1.
To enter this function press the MODE
2.
button until the flat tire icon and pressure
units are displayed.
Press the TIRE button to scroll to the
3.
desired axle. The tires of the selected axle
are filled in.
Press the MODE button to view the
4.
current value.
Press the TIRE button to increase the
5.
value.
Press the MODE button to decrease the
6.
value.
Press the SET button to save when the
7.
desired value is reached.
Repeat programming steps 2-7 until Low-Pressure
warning levels are set for all axles as desired.
Press the SET button to exit.
8.
Press the SET button again to revert to
9.
normal view.
(see page 12)