Tire Rotation - BENDIX SmarTire User Manual

T I R E R O TAT I O N
This function is used after tires are rotated and
the new positions need to be updated. This
procedure is valid for four tire locations only.
Programming Steps
Enter Level 1 Programming Mode
1.
To enter, press the MODE button until
2.
the tire rotation icon is displayed.
Press the TIRE button to scroll to a tire
3.
position.
Press the MODE button to select it for
4.
editing.
Note the color of the washer on the physical
5.
tire at the currently selected position.
Use table 1 provided to determine the number
6.
corresponding to color noted in step 5.
Use the TIRE or MODE button to
7.
adjust the value to the number
determined in step 6.
Press the SET button when the number
8.
representing the desired sensor is achieved.
This returns the display to the tire selection menu.
Scroll to a different tire location and edit the sensor
numbers as above.
(see page 12)
19