Philips Sonicare ExpertClean 7300 Manual page 330

330
Srpski
Charging and battery status
Charging
1 Plug the charger into an electrical outlet.
2 Place the handle on the charger.
3 The charging indicator will flash green until your toothbrush is fully
charged.
Note: Your handle comes pre-charged for first use. After first use,
charge for at least 24 hours.
Charging on charger or sanitizer
1 Plug the charger or sanitizer into an electrical outlet.
2 Place the handle on the charger or sanitizer.
3 The charger will charge your toothbrush until it is fully charged.
Note: Your handle comes pre-charged for first use. After first use,
charge for at least 24 hours.
Charging with the travel case*
* Note: The charging travel case may not be included depending on
the model purchased.
1 Connect the charging travel case to 5V DC input power either from:
- The USB adapter provided
- a UL-listed or certified to ANSI/UL 60950-1 personal
computer's standard USB connector or,
- a UL-listed or certified to ANSI/UL 60950-1 LPS power supply
with USB output port or,
- a UL-listed or certified 1310 Class 2 power supply.
Important: The wall adapter must be a safe extra low
voltage source, compatible with the electrical ratings
marked on the bottom of the device.
2 The travel case will charge your toothbrush until your toothbrush is
fully charged.
Note: Charging the handle with the charging travel case may take
longer than on the charger.