Table of Contents
Advertisement
EL-IP-OBF2-WH
/
EL-IP-OBF4-WH
/
EL-IP-OBV2-WH
EL-IP-OBV4-WH
/
EL-IP-OBV2-BK
/
EL-IP-OBA4-BK
/
EL-IP-OBA4-BK
EMERGENCY FACTORY DEFAULT
To restore the hardware to factory default settings, please follow these steps:
1. Press and hold RESET for 10 seconds before releasing.
2. The camera will be restored to factory default settings after approximately
90 seconds and will reboot automatically.
3. Search for the IP device.
4. Start the IP device via an Internet browser.
5. Enter the default username "ELAN" and password "3526" to operate.
NOTE:
Cameras are configured to use DHCP by default but will revert to the
default address 192.168.0.200 if a DHCP server is not available.
11
contact techsupport@elanhomesystems.com
Hide quick links:
Advertisement
Table of Contents
