Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Elan EL-IP-OBF2-WH
Summary of Contents for Elan EL-IP-OBF2-WH
-
Page 1: Quick Start Guide
EL-IP-OBF2-WH / EL-IP-OBV2-WH EL-IP-OBF4-WH / EL-IP-OBV4-WH Quick Start Guide... - Page 2 QUICK START GUIDE BEGINNING USING THIS CAMERA IMPORTANT!! If you are installing an ELAN Cameras and/or ELAN NVR with an ELAN Controller, please refer to the “ELAN Surveillance” Integration Note for setup and software configuration. ELAN Integration Notes are served through the ELAN tools and on elanhomesystems.com/ dealer-resources.
- Page 3 EL-IP-OBF2-WH / EL-IP-OBF4-WH / EL-IP-OBV2-WH / EL-IP-OBV4-WH NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 4 QUICK START GUIDE Unit: mm www.elanhomesystems.com...
-
Page 5: Installation
EL-IP-OBF2-WH / EL-IP-OBF4-WH / EL-IP-OBV2-WH / EL-IP-OBV4-WH PART DESCRIPTION & DIMENSIONS Sun Shield Main Body Front Cover Bracket Base Window Lens RJ-45 Network Port (supports PoE) Power jack (DC12V ±10%) Micro SD card slot Reset Key INSTALLATION 1. Remove the camera from the box first. Connect the Ethernet cable and power cable to the camera’s RJ-45 network connector and DC power-in... - Page 6 QUICK START GUIDE 2. Adjust the five adjustment screws to move the camera to the desired angle, and then tighten the adjustment screws (FIG.3–8). www.elanhomesystems.com...
-
Page 7: Inserting A Microsd Card
EL-IP-OBF2-WH / EL-IP-OBF4-WH / EL-IP-OBV2-WH / EL-IP-OBV4-WH 3. Rotate focus and zoom knobs for optimal video images (FIG.9). NOTE: Vari-Focal Model Only. INSERTING A MICRO SD CARD Rotate the front cover counterclockwise to remove it and insert a Micro SD card (FIG.10 & FIG.11). - Page 8 QUICK START GUIDE SYSTEM ARCHITECTURES For connecting EL-IP-OB Camera series to the network, please follow one of the system architectures: (1). Use DC12V power adaptor and network switch connected to a network. Fixed Lens (2). Use with PoE of the network switch connected to the network. Fixed Lens (3).
-
Page 9: Emergency Factory Default
3. Search for the IP device using the IPScan software. 4. Start the IP device via an Internet browser. 5. Enter the default username “ELAN” and password “3526” to operate. NOTE: Cameras are configured to use DHCP by default but will revert to the default address 192.168.0.200 if a DHCP server is not available. -
Page 10: Software Requirements
QUICK START GUIDE SOFTWARE REQUIREMENTS Universal ActiveX software components are required for online display of MJPEG or H.264 Full HD video. When you log in to the IP camera from Internet Explorer, a security warning dialog box will prompt the installation of the Universal ActiveX plug-in. - Page 11 EL-IP-OBF2-WH / EL-IP-OBF4-WH / EL-IP-OBV2-WH / EL-IP-OBV4-WH INTERNET BROWSER SETTINGS & APPLICATION REQUIRED Make sure your Internet browser allows the signed ActiveX plug-in to work on your computer. To do this, open Internet Explorer and go to Tools-> Options-> Security Settings.
- Page 12 1 (707) 283-5900 - International 1 (707) 283-5901 - Fax web: elanhomesystems.com Core Brands, LLC, 1800 S McDowell Blvd., Petaluma, CA 94954, USA ©2017 Core Brands, LLC. All rights reserved. 10019486 Rev-A0, 11/2017 ELAN is a registered trademark of Core Brands, LLC.