Page 2
QUICK START GUIDE BEGINNING USING THIS CAMERA IMPORTANT!! If you are installing ELAN Cameras and/or ELAN NVR with an ELAN Controller, please refer to the “ELAN Surveillance” Integration Notes for setup and software configuration. ELAN Integration Notes are served through the ELAN tools and on elanhomesystems.com/ dealer-resources.
Page 3
EL-IP-OBF2-WH EL-IP-OBF4-WH EL-IP-OBV2-WH EL-IP-OBV4-WH EL-IP-OBV2-BK EL-IP-OBA4-BK EL-IP-OBA4-BK NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 4
QUICK START GUIDE Units: mm [ Fixed Lens Camera] [ VariFocal and AutoFocus Camera] www.elanhomesystems.com...
EL-IP-OBF2-WH EL-IP-OBF4-WH EL-IP-OBV2-WH EL-IP-OBV4-WH EL-IP-OBV2-BK EL-IP-OBA4-BK EL-IP-OBA4-BK PART DESCRIPTION & DIMENSIONS Sun Shield Main Body Front Cover Bracket Base Window Lens RJ-45 Network Port (supports PoE) Power jack (DC12V ±10%) MicroSD card slot Reset Button INSTALLATION 1. Remove the camera from the box. Connect the Ethernet cable and power cable to the camera’s RJ-45 network connector and DC power-in...
Page 6
QUICK START GUIDE 2. Loosen the five adjustment screws to orient the camera to the desired angle, and then tighten the adjustment screws (FIG.3–8). FIG. 4 FIG. 3 FIG. 5 FIG. 6 FIG. 7 FIG. 8 www.elanhomesystems.com...
NOTE: VariFocal Model Only. ZOOM FOCU S FIG. 9 For AutoFocus models, use the ELAN software or the camera web GUI. INSERTING A MICRO SD CARD Rotate the front cover counterclockwise to remove it and insert a MicroSD card (FIG.10 & FIG.11).
QUICK START GUIDE SYSTEM CONNECTIONS For connecting EL-IP-OB Camera series to the network, please follow one of the system architectures: (1). Use DC12V power adapter and the network switch connected to the network. (2). Use with PoE from the network switch connected to the network. (3).
Page 9
EL-IP-OBF2-WH EL-IP-OBF4-WH EL-IP-OBV2-WH EL-IP-OBV4-WH EL-IP-OBV2-BK EL-IP-OBA4-BK EL-IP-OBA4-BK INTERNET BROWSER SETTINGS & APPLICATION REQUIRED Make sure your Internet browser allows the signed ActiveX plug-in to work on your computer. To do this, open Internet Explorer and go to Tools-> Options-> Security Settings.
QUICK START GUIDE CONFIGURING IP CAMERAS If using in ELAN automation system, please refer to the integration note at the beginning, and use the ELAN configurator for Auto-Discover/Auto-Configure features. If installing camera with no ELAN system, follow the browser connections below.
3. Search for the IP device. 4. Start the IP device via an Internet browser. 5. Enter the default username “ELAN” and password “3526” to operate. NOTE: Cameras are configured to use DHCP by default but will revert to the default address 192.168.0.200 if a DHCP server is not available.