Page 2
QUICK START GUIDE BEGINNING USING THIS CAMERA IMPORTANT!! If you are installing ELAN Cameras and/or ELAN NVR with an ELAN Controller, please refer to the “ELAN Surveillance” Integration Notes for setup and software configuration. ELAN Integration Notes are served through the ELAN tools and on elanhomesystems.com/ dealer-resources.
Page 3
EL-IP-ODF2-WH EL-IP-ODF4-WH EL-IP-ODV2-WH EL-IP-ODV4-WH/ EL-IP-ODV2-BK/ EL-IP-ODA4-WH/ EL-IP-ODA4-BK NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 4
QUICK START GUIDE Units: mm [ Fixed Lens Camera] [ VariFocal and AutoFocus Camera] PART DESCRIPTION & DIMENSIONS Bottom bracket Power jack (DC12V ±10%) Upper cover Audio in/out terminal Transparent cover Alarm in/out terminal Lens MicroSD card slot RJ-45 Ethernet connector Factory default button (supports PoE) www.elanhomesystems.com...
EL-IP-ODF2-WH EL-IP-ODF4-WH EL-IP-ODV2-WH EL-IP-ODV4-WH/ EL-IP-ODV2-BK/ EL-IP-ODA4-WH/ EL-IP-ODA4-BK INSTALLATION 1. Retrieve the camera and remove the bottom bracket from the upper cover with a hex key (FIG.1). [ Fixed Lens Camera] [ VariFocal and AutoFocus Camera] 2. Use the included screws (M4.0x25) through the holes marked as “a,”...
Page 6
(FIG.4). Adjust the zoom and focus for the best image, and tighten the screws after the adjustment for manual VariFocal models (Fig.4). For AutoFocus cameras, (VariFocual only) use the ELAN Viewer, or the camera web GUI. www.elanhomesystems.com...
Page 7
EL-IP-ODF2-WH EL-IP-ODF4-WH EL-IP-ODV2-WH EL-IP-ODV4-WH/ EL-IP-ODV2-BK/ EL-IP-ODA4-WH/ EL-IP-ODA4-BK 4. Attach the Ethernet and power cables to the RJ-45 connector and the DC-in connector, respectively (FIG.5). Connect the RJ-45 Ethernet cable with a waterproof connector First, remove the waterproof connector and unscrew the waterproof nut.
QUICK START GUIDE WALL MOUNT IR ADJUSTMENT [FOR VARIFOCAL AND AUTOFOCUS CAMERAS] When wall mounting the VariFocal and AutoFocus Dome IR Camera, remember to adjust the infrared beam (FIG.9). SYSTEM CONNECTIONS For connecting outdoor camera series to the network, please follow one of the system architectures: (1).
Page 9
EL-IP-ODF2-WH EL-IP-ODF4-WH EL-IP-ODV2-WH EL-IP-ODV4-WH/ EL-IP-ODV2-BK/ EL-IP-ODA4-WH/ EL-IP-ODA4-BK INTERNET BROWSER SETTINGS & APPLICATION REQUIRED Make sure your Internet browser allows the signed ActiveX plug-in to work on your computer. To do this, open Internet Explorer and go to Tools-> Options-> Security Settings.
QUICK START GUIDE CONFIGURING IP CAMERAS If using in ELAN automation system, please refer to the integration note at the beginning, and use the ELAN configurator for Auto-Discover/Auto-Configure features. If installing camera with no ELAN system, follow the browser connections below.
3. Search for the IP device. 4. Start the IP device via an Internet browser. 5. Enter the default username “ELAN” and password “3526” to operate. NOTE: Cameras are configured to use DHCP by default but will revert to the default address 192.168.0.200 if a DHCP server is not available.
Need help?
Do you have a question about the EL-IP-ODA4-WH and is the answer not in the manual?
Questions and answers