Westfalia 89 01 14 Original Instructions Manual page 10

Please note the included General Safety Notes and the
following safety notes to avoid malfunctions, damage
or physical injury:

Make sure the voltage corresponds to the type label on the
unit.

Pay attention to the warning symbols. All those instructions
are important for safety reasons. Always observe these in-
structions as failure to do so could result in serious injury!

Persons with limited physical, sensorial or mental abilities are
not allowed to use the pole saw, unless they are supervised
and briefed for their safety by a qualified person.

Only use the pole saw as indicated in this manual for cutting
wood or objects made of wood.

The pole saw must be used only by one person at a time.
Make sure bystanders do not stay in the pole saw's area of
swing.

Make sure the pole saw is not touching anything and moving
free. Firmly hold the pole saw in both hands when working.

Cutting with the pole saw when standing on a ladder or on
any other instable place is not allowed.

Use only original accessories and original replacement parts.

For using the pole saw, we recommend the use of an RCD
with a residual current of < 30 mA. In Switzerland the utilisa-
tion of an RCD is obligatory.

Never move the pole saw by pulling the cord. Make sure the
cord cannot get caught in any way. Do not wind the cord and
make sure the cord is always behind the machine.
Safety Notes
6