Table of Contents
Advertisement
•
Never point the blow-out gun at other persons an
never use it to clean clothes that are still being worn.
1.3 Safety information for paint spraying
•
Never process paints or solvents with a flash point
below 55°C.
•
Never heat paints or solvents.
•
It is imperative to use filtering equipment (face masks)
when processing harmful liquids. Note also the
information concerning safety precautions published
by the manufacturers of these liquids.
•
Smoking is prohibited during the spraying operation
and in the work room. Paint vapours are highly
flammable.
•
Make sure there are no open fires or open lights in the
work room. Sparking machines are not to be used.
•
Do not keep or consume food and drink in the work
room. Paint vapours are harmful.
•
The details and designations of the Ordinance on
Hazardous Substances, which are displayed on the
outer packaging of the processed material, must be
observed. Additional protective measures are to be
undertaken if necessary, particularly the wearing of
suitable clothing and masks.
•
The work room has to be bigger than 30 m3 and have
sufficient ventilation for spraying and drying. Never
spray into the wind. It is always imperative to observe
the regulations of your local police authorities when
spraying combustible or hazardous substances.
•
Never process media such as white petroleum spirit,
butyl alcohol and methylene chloride with the PVC
pressure hose (reduced life span).
1.4 Operating pressure vessels
•
An operator of a pressure vessel is required to keep
the pressure vessel in good working order, to operate
it properly, to supervise its use, to carry out essential
maintenance and repair work immediately, and to
introduce essential safety measures according to
requirements.
•
The supervisory authorities may order essential
safeguards from case to case.
•
A pressure vessel may not be operated if it has any
defects which constitute a danger to employees or
third parties.
•
The pressure vessel must be regularly inspected for
damage, e.g. rust. If you discover any damage, then
please contact the customer service workshop and
ensure the machine is not operated any more.
Keep these safety instructions in a safe place.
AFTER SALES SUPPORT
1300 922 271
service.australia@einhell.com
2. LAYOUT
1. Intake air filter
2. Pressure vessel
3. Wheels
4. Feet
5. Quick-lock coupling (regulated compressed air)
6. Pressure gauge (for reading the preset tank pressure)
7. Pressure regulator
8. ON/OFF switch
9. Transportation handle
10. Safety valve
11. Drainage valve for condensation water
12. Pressure gauge (for reading the tank pressure)
13. Quick-lock coupling (unregulated compressed air)
14. Oil sealing plug (oil filler opening)
15. Oil drainage screw / Oil level window
16. Overload switch
3. SCOPE OF USE
The compressor is designed for generating compressed air
for tools operated by compressed air.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications. Our
warranty will be voided if the machine is used in commercial,
trade or industrial businesses or for equivalent purposes.
The machine is to be used only for its prescribed purpose.
Any other use is deemed to be a case of misuse. The user
/ operator and not the manufacturer will be liable for any
damage or injuries of any kind caused as a result of this.
4. TECHNICAL DATA
Power supply:
Motor rating in W/HP:
Compressor speed in rpm:
Operating pressure in bar:
Pressure vessel volume in litre:
Theoretical intake rate in L /min.:
Sound power level L
in dB:
WA
Sound pressure level L
pA
Protection type:
Machine weight in kg:
Operating mode S3 - 50% - 10min: S3 = Intermittent mode
without influencing the starting process. This means that
during a period of 10 min the max. operating time is 50%
(5 min).
8
MODEL NUMBER: BT-AC 400/50 ,
220-240V~ 50 Hz
in dB:
approx 45kg
2200/3
2850
max. 8
50
356
92.1
72.1
IP20
09/12
Advertisement
Table of Contents
