Vector Pocket Generator VEC018-AC Owner's Manual & Warranty page 8

Storage
• Ideal storage temperature range is 50-68°F (10-20°C).
• Store the Pocket Generator™ in a cool, dry place with adequate ventilation for
all-around air circulation.
• Avoid locations that are exposed to heating units, radiators, direct sunlight, or
excessive humidity or dampness.
• To maximize useful life, fully charge the unit before storing.
• If storing at less than 50°F, recharge every six months; at 50-80°F, recharge
every three months; at 80-104°F, recharge every 45 days.
• Always make sure the unit is disconnected from charger before storing.
SPECIFICATIONS: Pocket Generator™
AC Output
DC Output
Fuse
Battery
Inverter
Weight:
Height:
Depth:
Width:
Power Force 50™ Inverter
WARNING:
reason - it is hard-wired into the unit, and you may cause unnecessary damage to
the unit and void the manufacturer's warranty. In the event of any failure, refer to
the warranty information at the back of this manual and return the complete unit for
repair or replacement, or call the customer service department at Vector
Manufacturing, Ltd. (954) 923-1155.
The Vector™ Power Force 50™ inverter supplied with the Pocket Generator™ is
one in a series of the most advanced DC to AC inverters available today. With
proper care and maintenance, it will deliver years of dependable service. For easy
reference, see sections titled:
Introduction
How the Power Force 50™ Inverter Works
Power Source Requirements
Fuse Replacement
Operating Tips
Troubleshooting
Specifications
110-volts
12-volts
10 amps
12-volt 5 amp hour sealed lead acid, maintenance-free
50-watts continuous/80 amps peak surge capacity
4.60lbs.
6.25"
4.00"
7.50"
Do not attempt to remove the inverter from the unit for any
7