Next steps
1. Install the
heat
sink.
2. Install the
display
assembly.
3. Install the battery.
4. Install the
solid-state drive in M.2 slot
5. Install the
solid-state drive in M.2 slot
6. Install the
WLAN
card.
7. Install the
memory
module.
8. Install the
base
cover.
9. Follow the procedure in
Identifier
Version
Status
Palm-rest and keyboard assembly
Identifier
Version
Status
Removing the palm-rest and keyboard assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
memory
module.
4. Remove the
WLAN
card.
5. Remove the
solid-state drive in M.2 slot
6. Remove the
solid-state drive in M.2 slot
7. Remove the fan.
8. Remove the battery.
9. Remove the
power-adapter
10. Remove the
display
assembly.
11. Remove the
I/O
board.
12. Remove the touchpad.
13. Remove the
coin-cell
battery.
14. Remove the
heat
sink.
15. Remove the
power-button board with optional fingerprint
16. Remove the
system
board.
NOTE:
The system board can be removed along with the heat sink.
17. Remove the speakers.
About this task
After performing the steps in the pre-requisites, we are left with the palm-rest and keyboard assembly.
two.
one.
after working inside your
computer.
GUID-4AAEA62D-3F30-4E6E-ADEC-AD46B79B8EA6
2
Released
GUID-E056A38D-AC1D-4D35-908B-C053FACD417A
1
Released
before working inside your
one.
two.
port.
computer.
reader.
Removing and installing components
65