About this task
The following image indicates the location of the memory module and provides a visual representation of the installation procedure.
Steps
1. Lift the mylar to find the memory-module slot.
2. Align the notch on the memory module with the tab on the memory-module slot.
3. Slide the memory module firmly into the slot at an angle.
4. Press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
after working inside your
computer.
Removing and installing components
23