LG GTF744BLPZD Owner's Manual page 31

Symptoms
Did you store hot food without
cooling it first?
There is
Did you leave the appliance
condensation
door open?
inside the
appliance or on
Do you open and close the
the bottom of the
appliance door too frequently?
vegetable drawer
cover.
Did you put warm or moist
food inside without sealing it
in a container?
Doors may not be closed
properly?
Did you store hot food without
Frost has formed
cooling it first?
in the freezer
compartment.
Is the air entry or exit of the
freezer compartment blocked?
Is the freezer compartment
overfilled?
Did you open and close the
appliance door frequently or is
the appliance door improperly
Frost or
closed?
condensation
has formed
inside or outside
Is the installation environment
the appliance.
humid?
Is the appliance installed on a
weak floor or improperly
leveled?
The appliance is
Does the rear of the appliance
noisy and
touch the wall?
generates
abnormal
Are objects scattered behind
sounds.
the appliance?
Is there an object on top of the
appliance?
Reason Solution
• Cool the hot food first before putting it in
the fridge or freezer compartment.
• Although the condensation will disappear
soon after you close the appliance door,
you can wipe it with a dry cloth.
• Condensation can form due to the
temperature difference from the outside.
Wipe out the dampness with a dry cloth.
• Store food in a covered or sealed
container.
• Check if the food item inside the
appliance is blocking the door and make
sure that the door is tightly closed.
• Cool the hot food first before putting it in
the fridge or freezer compartment.
• Make sure that air entry or exit is not
blocked so that the air can circulate
inside.
• Maintain an appropriate space between
items.
• Frost or condensation can form if the
outside air penetrates inside the
appliance.
• Condensation can appear on the exterior
of the appliance if the installation area is
too humid or on a humid day such as a
rainy day. Wipe off any moisture with a
dry cloth.
• Install the appliance on a solid and flat
area.
• Adjust the installation position to allow
enough clearance around the appliance.
• Remove the scattered objects from
behind the appliance.
• Remove the object on top of the
appliance.
EN
31