Functions Of E-Actuator Calibrating Tool - SACER E-ACTUATOR SA1478 Manual

Functions of E-ACTUATOR CALIBRATING TOOL

5.
5.1 Reading actuator
After successful reading of the parameters the following options
are available:
5.2 Parameters
This will display actuator parameters on PC:
Figure above explains operating range of geometry lever.
Maximum angle that can be achieved by moving lever is 120° .
Actual operating range for specific actuator can be different.
A defines offset between 0° position and programmed open angle.
B defines offset between 0° position and programmed close angle.
C defines lever work angle.
7