Advertisement
the actual working conditions; on opposing situation, the value
should be increased.
2) If move the progress bar to the far left of the "Open angle", the
flow of the turbo assembly is smaller than expect, then the value
needs to be increased .The specified value should be determined
by the actual working conditions; On opposing situation, the value
should be decreased
3) After adjusting the angle value, please press the "Program New
Angles" button, your changes will be programmed in the actuators.
Programming success or not will be shown on the left bottom. Log File
will record the data of each programming. You can program the
actuator for multiple times until you get your ideal value.
11
Advertisement
