Handling Discs - Siemens CHM 604 MP3 User Manual

CDC603A Aug.06-03
OPERATION

HANDLING DISCS

Do not drop discs.
Keep discs free from dirt and fingerprints.
Scratched discs may cause skipping of music parts.
Do not glue paper or labels on discs.
Do not write on discs.
Do not play damaged or deformed discs.
Never expose discs to heat or direct sunshine.
Wipe a dirty disc surface clean with a soft cloth;
move from the centre to the edge.
Never use publicity CDs!
EMERGENCY EJECT OF THE CARTRIDGE
ATTENTION: Under no circumstances use this function when:
the CD changer is connected to the power supply,
a magazine is in the changer and the power supply is still
connected.
If you have inserted a CD cartridge without the CD changer
connected to the power supply, you can unlock and remove
the magazine:
Fully open the sliding door.
1
Through the slit of the transparent sticker on the
2
underside of the CD changer slide the plastic lever to the
side with a screwdriver.
The CD cartridge is partially ejected and you can remove
it.
OPERATION
SELECTING AUDIO OUTPUT FORMAT
The default setting of the audio output format is digital
(SPDIF).
To select 2-channel analogue output format, use a pen or
screw driver to set the switch accordingly.
Position "D" for digital output and "A" for analogue
output.
The changer should be reset after selecting "D" or "A", to
reset the CD changer;
(1) Press the eject button for more than 3 seconds or
(2) Unplug the DIN cable for more than 3 seconds then
re-plug the cable.
8