Advertisement
Set Up
8
WiFi Access Point
Choose: One of three options.
1.) If your AyrMesh hub provides good Wifi through -
out your house.
•Select: Turn off Router's wireless access point
• Click Next.
• Go to Step 9.
2.) If you do not have an AyrMesh Hub, or If your
AyrMesh Hub is not usable throughout your house.
(e.g. Hub is above a metal roof)
• Select: Use SSID and WPA passkey from ayrmesh.com
• Click Next.
• Go to Step 9.
Final Steps
9
• Router will reboot.
Takes about one minute.
• Login Page will show on screen.
If you get a timeout message click the browser's refresh button.
• Connect: Short Ethernet cable attached to the
Power Supply to your Internet connection
device.
(pic.15)
Modem, Radio or Primary Router
• Test Internet connection.
Connection is Good: Go to Step 10
Unable to Connect:
See the Ayrmesh Router Troubleshooting Guide.
Connecting to an "all-in-one" router/gateway device?
Put AyrMesh into the DMZ of the device:
Visit http://ayrstone.com/support for
examples.
Contact your ISP for detailed instructions.
(pic.9)
(pic.15)
8
Continued
3.) If you want a separate WiFi signal from your Router,
and if your AyrMesh hub provides good Wifi throughout
your house.
•Select: Configure Router's wireless access point
as follows:
• Fill in SSID
(Name of the network. Different from your
AyrMesh SSID.)
• Select Encryption type.
Select WPA2-AES if supported by all devices.
Select WPA-TKIP if you have older devices.
• Fill in Encryption Password.
Ensure you can remember it and keep it a secret.
• Fill in the Channel.
Use a channel that is at least 5 away from your
Hub's channel. e.g. Hub is on channel 6, Router
can be set to channel 1 (default).
• Click Next.
• Go to Step 9.
10
Login to
Ayrmesh.com
• Start an Internet Browser
Internet Explorer, Firefox, Safari, Chrome, etc.
• On the URL Line type: Ayrmesh.com
• If you have an Ayrmesh account:
Log In.
• If you do not have an Ayrmesh account:
Click:No username? Sign up now-it's free
• Fill in the Sign up Page
(
Be sure to supply a working email address.)
On Ayrmesh.com, you can monitor and
control your Ayrmesh network.
Note: Once you set up your router it will
appear on your front page.
(pic.15)
(pic.15)
Advertisement
