Configuration Menu; Firmware Update Menu - process-informatik 9354-CONNECT-LTE Operation Quick Start Manual

In the Configuration menu, the expert configuration will be carried out differently from the quick commissioning
of the device. For example, you can set the DHCP mode, set IP addresses, and carry out the basic configuration
of the device again.
LAN-B settings only for CONNECT-LTE (operating mode (AUTO)
LTE settings only for CONNECT-LTE
In the Firmware Update menu, the firmware of the CONNECT and CONNECT-LTE is updated.
To do this, download the current firmware file to your PC from the product page. With Browse you select this
file and accept it. The file name is displayed in the user interface for checking. By clicking Update firmware, the
firmware file is loaded into the device and burned to the flash memory after a positive check. The device then
restarts.
You can find more about the product and the current device manual on the product page of the CONNECT /
CONNECT-LTE.