Advertisement
USING YOUR UMBRELLA
BRACKET WITH FLASH MOUNT
1
Loosen the locking screw.
2
Install the bracket on the top of your
Light Stand
OR
Install the adapter stud on your
tripod or stand and install the
bracket on the adapter stud as
shown (required on most stands or
tripods).
3
Tighten the locking screw to secure
the bracket.
4
Place your photo flash in the cold shoe flash mount on the top
of the bracket. Tighten the thumb screw lock to secure it.
Locking screw
5
Insert the base of your umbrella into the umbrella socket, then
tighten the screw lock to secure it. Point the flash at the center
of the umbrella.
Adapter stud
Screw Lock
6
Loosen the tension screw, adjust the tilt, then tighten the
screw to secure the bracket. Then aim for best lighting.
SPECIFICATIONS
• Warranty: 12 months parts & labor
• Dimensions (L x W x H): 3.3 x 1.1 x 4.1 in. (8.3 x 2.7 x 10.5 cm)
• Net weight: .37 lbs (0.17 kg)
Cold Shoe Flash Mount
CONTACT INSIGNIA:
Thumb Screw Lock
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2015 Best Buy. All rights reserved.
Made in China
V1 English 15-0323
Advertisement
