Quick Removal Of The Interphone - Blueant Interphone none User Manual

Handsfree & bluetooth intercom helmet kit

Hide thumbs Also See for Interphone none:

Table of Contents

3. Next, take the Ear Speaker(7) and attach it to the Velcro Pad. Run the

Microphone Arm down along down to where your mouth will be. As the

Microphone Arm is flexible, you can adjust it so it sits in the optimum position in

front of your mouth. Some helmets have removable padding; if yours does, it is

recommended to run the speaker and mic under the padding.

4. Taking care to match the

pins

up,

Headset Plug(9) to the

Headset Socket(5). The

plug can only be inserted

in one position.

5. Secure the cord of the Headset

Plug(9) inside the helmet. Tuck

any extra wire into the helmet.

Ensure that only few centimeters

of the cord comes out.

You have successfully mounted the InterPhone

Quick removal of the InterPhone

connect

the

Remove the BlueAnt InterPhone by pushing down the lock

as shown and then take out the InterPhone Module in an

upward motion.

Table of Contents

Do you have a question about the Interphone none and is the answer not in the manual?