Yamaha F250B Owner's Manual page 71

Do not tilt the outboard motor up so that
G
the cooling water inlet on the lower unit
is above the surface of the water when
setting up for and cruising in shallow
water. Otherwise severe damage from
overheating can result.
EMU35236
Procedure for power trim and tilt models
1. Place the control lever in neutral.
2. Slightly tilt the outboard motor up to the
desired position using the power trim and
tilt switch. WARNING! Using the power
trim and tilt switch on the bottom
cowling while the boat is moving or
engine is on could increase the risk of
falling overboard and could distract
the operator, increasing the risk of
collision with another boat or an ob-
stacle.
[EWM01850]
N
ZMU06236
N
ZMU05829
Operation
UP
UP
UP
UP
ZMU06280
ZMU05837
ZMU05838
65