Checking Power Trim And Tilt System - Yamaha F250B Owner's Manual

Operation
After installing, check the fitting of the top
cowling by pushing it with both hands. If the
top cowling is loose, have it repaired by your
Yamaha dealer.
44
EMU35243

Checking power trim and tilt system

EWM01930
WARNING
Never get under the lower unit while it is
G
tilted, even when the tilt support lever is
locked. Severe injury could occur if the
outboard motor accidentally falls.
Body parts can be crushed between the
G
motor and the clamp bracket when the
ZMU06131
motor is trimmed or tilted.
Be sure no one is near the outboard mo-
G
tor before performing this check.
1. Check the power trim and tilt unit for any
sign of oil leaks.
2. Operate each of the power trim and tilt
switches on the digital electronic control
and engine bottom cowling (if equipped)
to check that all switches work.
ZMU06133
3. Tilt the outboard motor up and check that
the tilt rod and trim rods are extended
completely.
1. Tilt rod
2. Trim rods
4. Use the tilt support lever to lock the motor
in the up position. Operate the tilt down
switch briefly so the motor is supported
by the tilt support lever.