Setting Dvd Preferences; Using The Setup Menus; Menu Description - JVC TH-U1 Series Instructions Manual

Setting DVD preferences

Using the setup menus

• You can change the language used in the setup menus.
See "Menu description".
Basic operation on the setup menus
7While stopped
1
Press SET UP, while holding SHIFT.
2
Follow the instructions on the TV
screen.

Menu description

: Language menu (LANGUAGE)
7 MENU LANGUAGE
Some DVDs have their own menus in multiple languages.
• Select the initial menu language*.
7 AUDIO LANGUAGE
Some DVDs have multiple audio languages.
• Select the initial audio language*.
7 SUBTITLE
Some DVDs have multiple subtitle languages.
• Select the initial subtitle language*.
7 ON SCREEN LANGUAGE
• Select the language shown on the TV screen when
operating this system.
* When the language you have selected is not recorded on a
disc, the original language is automatically used as the
initial language.
Some languages are represented with the language codes
(ex.: "AA" for Afar) instead of their names. If the language
you want to select is not shown with its name, see "The
language codes list" (see page 34)
code.
Cursor
(3/2/Y/5)/
ENTER
7 MONITOR TYPE
You can select the monitor type to match your TV when
you play DVDs recorded with a picture height/width ratio
of 16:9.
• 16:9 (Wide television conversion)
Select this when the aspect ratio of your TV is 16:9 (wide
TV).
• 4:3 LB (Letter Box conversion)
Select this when the aspect ratio of your TV is 4:3
(conventional TV). While viewing a wide screen picture,
black bars appear on the top and the bottom of the
screen.
• 4:3 PS (Pan Scan conversion)
Select this when the aspect ratio of your TV is 4:3
(conventional TV). While viewing a wide screen picture,
black bars do not appear, however, the left and right edges
of the pictures will not be shown on the screen.
NOTE
• Even if "4:3 PS" is selected, the screen size may become "4:3
LB" with some DVDs. This depends on how the DVD was
recorded.
7 PICTURE SOURCE
You can obtain optimal picture quality by selecting whether
the content on the disc/file is processed by field (video
source) or by frame (film source).
Normally set to "AUTO".
• AUTO
Used to play a disc/file containing both video and film
source materials.
This system recognizes the source type (video or film) of
the current disc/file according to the disc/file
information.
– If the playback picture is unclear or noisy, or the oblique
• FILM
Suitable for playing back a film source disc/file.
• VIDEO
Suitable for playing back a video source disc/file.
: Picture menu (PICTURE)
Ex.: 16:9 Ex.: 4:3 LB
lines of the picture are rough, try to change to other
modes.
to look up its language
Ex.: 4:3 PS
32