Installing Battery Pack - Lincoln Electric VIKING 3250D Operator's Manual

INSTALLING BATTERY PACK

Slide battery pack into blower unit just below filter cover until battery
pack latch snaps into position. It is very important that the battery
pack snaps into position. This makes sure the battery pack is locked
in place and will not slide out causing possible nuisance shutoffs
while in use.
To remove battery pack, simply push down on latch to release and
slide battery pack out from blower unit.
VIKING PAPR FGS 3250D WELDING HELMET
FIGURE 2
Blower
Unit
Battery
Pack
Latch
6