Keurig DRINKWORKS Home Bar Manual page 13

12.
Refill the Water Tank to the MAX Fill and replace it on
the drinkmaker.
13. Press START Button to begin rinsing. The drinkmaker will
Display "RINSING..." until this step is complete.
14. Empty, dry and store the half-gallon container.
15. Insert water filter in the Water Tank and refill the
Water Tank.
18
Your drinkmaker has a built in UV light to help keep your water
fresh. To prolong the life of the drinkmaker and maintain the
quality of drinks, we recommend that you run the Clean Cycle
every 30 days. Your drinkmaker will alert you anytime it thinks
you should clean it. If you would like to be reminded later
to clean simply press the Left Touch Arrow and you will be
reminded to clean 24 hours later. For the UV light to perform
its best, we recommend that you always keep your drinkmaker
plugged in and powered on.
Storage
Before you store your appliance make sure to do the following things:
1. Run an Empty Cycle.
2. Vent the CO remaining in the CO Cartridge and remove the CO
2 2
from the drinkmaker. See removal instructions on page 20.
3. Rinse, empty, and dry the Water Tank, Pod Basket, and Drip Tray.
4. Store your drinkmaker upright in a safe frost-free environment.
When you prepare to use your drinkmaker after storage, we recommend rinsing the
Water Tank with fresh water and running a Clean Cycle before you prepare your next drink.
Tutorials & Tips
Instructional videos are available online.
You can watch step by step videos on cleaning, rinsing, emptying, and more.
Visit www.drinkworks.com.
Cartridge
2
19