Home Bar Care & Cleaning - Keurig DRINKWORKS Home Bar Manual

Home Bar care & cleaning.
Cleaning the Drinkmaker Exterior
Keep your drinkmaker looking its best by cleaning the exterior
after making drinks. Wipe down all the surfaces on your
drinkmaker with a clean, moist, lint-free, non-abrasive cloth.
Never immerse the drinkmaker in water or other liquids.
Cleaning the Drip Tray
The Drip Tray can accumulate up to 10 ounces of liquid before it
overflows. To remove the Drip Tray, slide it toward you, keeping
it level at all times to avoid spilling its contents. The Drip Tray
should occasionally be rinsed between cleanings. Clean the
Drip Tray with a damp, soapy, lint-free, non-abrasive cloth.
Cleaning the Pod Basket
Wash the Pod Basket at least once a week, but a quick rinse
after each drink is recommended—especially after making
flavorful cocktails*. The Pod Basket is removeable and can be
cleaned with a damp, soapy, lint-free, non-abrasive cloth or in
the top rack of the dishwasher. Keeping the Pod Basket clean
helps with drink quality.
*WARNING: Some beverage Pods may contain allergens such as milk, egg, wheat,
nuts, or soy, or have been produced in a facility that also produces products
containing milk, egg, wheat, nuts, or soy. Check the Pod packaging for allergen
information. If you make a drink with such a Pod, remove the Pod Basket and clean
it before your next drink, as there may be trace amounts of allergen on the basket.
M A X
12
Cleaning the Water Tank and Water Tank Lid
The Water Tank and Water Tank Lid should be periodically inspected and cleaned. Neither the
Water Tank or Water Tank Lid should be cleaned in the dishwasher. They should be cleaned with
a damp, soapy, lint-free, non-abrasive cloth and rinsed thoroughly. Do not dry the inside of the
Water Tank with a cloth as lint or other particles may transfer from the cloth to the Water Tank.
To clean the filter screen at the base of your Water Tank, empty the Water Tank and follow one
or all of the following procedures.
NOTE: If you are using a water filter inside the Water Tank, remove it before cleaning the Water
Tank. For water filter replacement, consult and follow the instructions and recommendations
on the filter package.
1. Rinse the filter screen with the strong force of water
from your faucet.
2. If you have a sprayer, aim the water spray at the
filter screen.
3. Fill the Water Tank with approximately two inches of
clean water, close the Water Tank, and agitate (shake)
the Water Tank.
4. Empty the Water Tank then fill it with clean water and
return it to the drinkmaker. If needed, repeat the
above procedures.
CAUTION: Please rinse the Water Tank thoroughly after cleaning so that no cleaners
or cleaning solutions remain in this area as they may contaminate the water supply in
the drinkmaker.
13