Gardenline GL-CM 36 Li User Manual page 15

Troubleshooting Guide
Fault
Motor does not
start
Motor performance
drops
Unclean cuts
Important. For protection, the motor is equipped with a thermal switch which cuts out when the
motor is overloaded and switches on again automatically after a short cooling period.
AFTER SALES SUPPORT
1300 922 271
Possible Causes
a) Capacitor defective
b) battery pack empty
c) Cable defective
d) Switch/plug block defective
e) Motor terminals or capacitor
disconnected
f) Mower standing in high grass
g) The mower housing is clogged
h) Safety plug is not inserted
i) Battery is not correctly inserted
a) Grass too tall or damp
b) The mower housing is clogged
c) Blades badly worn
d) Battery performance decreasing
a) Blades worn
b) Wrong cutting height
service.australia@isc-gmbh.info
Remedy
a) By customer service centre
b) Charge battery pack
c) Check the cable
d) By customer service center
e) By customer service center
f) Start motor on shorter grass
or already mowed area; change
cutting height if necessary
g) Clean housing so that the blade
can run freely (ensure safety plug
is removed)
h) Insert safety switch (see 7.)
i) Remove the battery and reinsert
a) Correct the cutting height
b) Clean housing
c) Replace blades
d) Check the battery performance
and charge the battery if necessary
(see 6.2)
a) Replace or resharpen the blade
b) Correct the cutting height
MODEL NUMBER: GL-CM 36 Li, 02/14
15
11