Personal Data Entry - HoMedics 9116 Instruction Manual

9116_Scale_IB_A/W.qxd:Layout 1
1) Press the on/off button to turn the scale on.
2) While '----' is flashing, press the SET button to activate the set-up procedure.
The user number will flash.
3) While the user number is flashing, select a user number by
pressing the L or M buttons. Press the SET button to confirm your selection.
4) The male or female symbol will flash.
Press L button until the correct symbol is flashing, then press the SET button.
5) The height display will flash.
Press L or M as necessary to set your height, then press the SET button.
6) The age display will flash.
Press L and M as necessary to set your age, then press the SET button.
Child Mode:
When the age is set from 6-12 years child mode is automatically selected.
Note: In child mode only weight, body fat and body water are displayed.
8) Your user number will flash, then your age, height and gender will be displayed.
Wait for '0.0' to be displayed, then allow the scale to switch off.The memory is then set.
9) Repeat procedure for a second user, or to change user details.
Note: To update or overwrite the memorised data, follow the same procedure, making changes
as required.
Tip: During the set-up procedure press on/off to quit and start again at any time.
6
25/10/07 09:45 Page 6

PERSONAL DATA ENTRY

Child Mode