Operation - Akai MPC ONE Quick Start Manual

Operation

Here is some general information about how to use the MPC One display:
Tap a button or option to select it. Use the
data dial or –/+ buttons to change its setting
or value
Spread two fingers to zoom in (into a section
of a waveform, for example). Pinch two fingers
to zoom out.
8
Double-tap a button to access advanced
editing options. In some cases, this will show
a numeric keypad that you can use to enter a
value (an alternative to the data dial or –/+
buttons). Tap the upper-left part of the display
to return to the previous view.
The upper edge of the display shows the
toolbar, which contains information about the
current view (often the name of the current
track, sequence, audio pointer position, etc.).
Tap an item to select it.
The lower edge of the display shows various
buttons that you can use in the current view.
Tap a button to press it.
To return to a previous view, either tap
outside of the window currently in the display
or tap the left arrow () in the upper-left part
of the display.
x2