Synchronizing Via Infrared And Bluetooth - UTStarcom PPC 6700 User Manual

Note When the dial-up and Wi-Fi connections are turned on at the same time, the Direct Push
feature will always go through the dial-up connection, for which you could be charged as
per your network operator's service plan.
To schedule synchronization at regular time intervals
You can set how often to synchronize during Peak times (which usually refer to your
working hours) when e-mail volume is high, as well as Off-peak times when e-mail
volume is low.
1. In ActiveSync on your device, tap Menu > Schedule.
2. Select a shorter time interval in the Peak times box for you to be able to receive
e-mails more frequently.
3. Select a longer interval in the Off-peak times box.
Tip To set the days and hours that make up your peak and off-peak times, tap Adjust peak
times to fit your schedule.

4.3 Synchronizing via Infrared and Bluetooth

You can connect your device to the PC to synchronize using the local wireless
technologies, such as infrared (IR) and Bluetooth. These technologies have almost similar
but slightly differing requirements.
To synchronize with a PC via infrared
1. Follow the instructions in ActiveSync Help on the PC for setting up your PC to receive
infrared beams.
2. Line up the infrared (IR) ports according to the instructions in the manufacturer's
documentation for your device so that they are unobstructed and within close range.
3. On the device, tap Start > Programs > ActiveSync.
4. Tap Menu > Connect via IR.
5. Tap Sync.
Synchronizing Information and Setting Up E-mail Security
|
49